HP StorageWorks 8/20q Command Line Interface Manual page 70

To display all zonesets, zones, and zone members in the active zoneset and configured zonesets, enter the
zoning list command, as shown in the following example. Merged and edited zonesets are displayed
if they exist.
8/20q FC Switch #> zoning list
Active (enforced) ZoneSet Information
ZoneSet
--------------------------------
wwn
Configured (saved in NVRAM) Zoning Information
ZoneSet
--------------------------------
wwn
70 Zoning Configuration
Zone ZoneMember
wwn_23bd31
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:23:bd:31
wwn_221416
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:22:14:16
wwn_2215c3
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:22:15:c3
Zone ZoneMember
wwn_23bd31
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:23:bd:31
wwn_221416
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:22:14:16
wwn_2215c3
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:22:15:16