Table of Contents
Advertisement
Installing and Configuring the Edge Switch 2/32
Configure and Enable Call-Home Features
There are two call-home features available, and only one is installed when the HAFM
application is installed on the HAFM server. To learn more about configuring
Call-Home features, refer to the hp StorageWorks HAFM server installation guide.
Configure Threshold Alerts
A threshold alert notifies users when the transmit (Tx) or receive (Rx) throughput
reaches specified values for specific switch ports or port types, (E_Ports or F_Ports).
You are notified of a threshold alert in four ways:
•
An attention indicator (yellow triangle) that displays on the port in the Hardware
View page.
•
An attention indicator (yellow triangle) that displays in the Alert column of the
Port List View page.
•
An attention indicator (yellow triangle) that displays by the Threshold Alerts
field in the Port Properties dialog box.
•
Detailed threshold alert data is recorded in the Threshold Alert Log.
Choose Configure > Threshold Alerts to configure the following:
•
Name for the alert.
•
Type of threshold for the alert (Rx, Tx, or either).
•
Active or inactive state of the alert.
•
Threshold criteria:
— Percent traffic capacity utilized. This is the percent of the port's throughput
capacity achieved by the measured throughput. This setting constitutes the
threshold value. For example the value of 50 means that the port's threshold is
reached when throughput is 50% of capacity.
— Time interval during which throughput is measured and alert notification can
occur.
— The time that the percentage of throughput capacity (% utilization) must exist
during the set time interval before an alert generates.
•
Ports for which you are configuring threshold alerts.
You can configure up to 16 alerts, and any number of alerts can be active at one time.
2-42
All manuals and user guides at all-guides.com
edge switch 2/32 installation guide
Advertisement
Table of Contents
