Zoning Database Limits; Configuring The Zoning Database - HP StorageWorks 8/20q Command Line Interface Manual

Zoning database limits

To display a summary of the objects in the zoning database and their maximum limits, enter the
zoning limits command, as shown in the following example:
8/20q FC Switch #> zoning limits
Configured (saved in NVRAM) Zoning Information
Zoning Attribute
----------------
MaxZoneSets
MaxZones
MaxAliases
MaxTotalMembers
MaxZonesInZoneSets
MaxMembersPerZone
MaxMembersPerAlias
ActiveZones
ActiveZoneMembers
To display abbreviated limits information, enter the zoning limits brief command.

Configuring the zoning database

You can configure how the zoning database is applied to the switch and exchanged with the fabric by
using the zoning configuration parameters. The following zoning configuration parameters are available
through the set config zoning command. For more information about the zoning configuration
parameters, see
• MergeAutoSave—Enables or disables the automatic saving of a new active zoneset to the switch
non-volatile zoning database.
• DefaultZone—Allows or denies communication among ports/devices that are not defined in the
active zoneset.
• DiscardInactive—Enables or disables the discarding of all zonesets except the active zoneset.
Maximum
-------
256
2000
2500
10000
2000
2000
2000
Table 38.
HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide
Current [Zoning Name]
------- -------------
6
17
1
166
19
10 D_1_JBOD_1
23 D_1_Photons
9 D_2_JBOD1
16 D_2_NewJBOD_2
5 E1JBOD1
5 E2JBOD2
3 LinkResetZone
3 LinkResetZone2
8 NewJBOD1
8 NewJBOD2
24 Q_1Photon1
8 Q_1_NewJBOD1
13 Q_1_Photon_1
21 Q_2_NewJBOD2
3 ZoneAlias
3 ZoneDomainPort
4 ZoneFCAddr
2 AliasInAZone
19
160
75