Port Group Member Attributes; Ms Group Member Attributes - HP StorageWorks 8/20q Command Line Interface Manual

Table 8 ISL group member attributes (continued)
Attribute
SecondarySecret
Binding
Table 9

Port group member attributes

Attribute
Member
Authentication
PrimaryHash
PrimarySecret
SecondaryHash
SecondarySecret
Table 10

MS group member attributes

Attribute
Member
CTAuthentication
Description
Hex string that is encrypted by the secondary hash and sent for
authentication. The string has the following lengths, depending on the
secondary hash function:
• MD5 hash: 16-byte
• SHA-1 hash: 20-byte
Domain ID of the switch to which to bind the ISL group member WWN.
This option is available only if FabricBindingEnabled is set to True
using the set config security command. 0 (zero) specifies no
binding.
Description
WWPN for the N_Port device that would attach to the switch. A member
cannot belong to more than one group. All loop device WWPNs must be
included in the group, otherwise the switch port will be downed, and none of
the devices will be able to log in.
Enables (Chap) or disables (None) authentication using the Challenge
Handshake Authentication Protocol. The default is None.
The preferred hash function to use to decipher the encrypted primary secret
sent by the Port group member. The hash functions are MD5 or SHA-1. If the
Port group member does not support the primary hash, the switch will use the
secondary hash.
Hexadecimal string that is encrypted by the primary hash for authentication
with the Port group member. The string has the following lengths depending
on the primary hash function:
• MD5 hash: 16-byte
• SHA-1 hash: 20-byte
Hash function to use to decipher the encrypted secondary secret sent by the
Port group member. Hash values are MD5 or SHA-1. The secondary hash is
used when the primary hash is not available on the Port group member. The
primary hash and the secondary hash cannot be the same.
Hex string that is encrypted by the secondary hash and sent for
authentication. The string has the following lengths depending on the
secondary hash function:
• MD5 hash: 16-byte
• SHA-1 hash: 20-byte
Description
Port worldwide name for the N_Port device that would attach to the
switch.
Common Transport (CT) authentication. Enables (True) or disables
(False) authentication for MS group members. The default is False.
HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 149