HP StorageWorks 8/20q Command Line Interface Manual page 249

The following is an example of the show log command:
8/20q FC Switch #> show log
[327][day month date time year][I][Eport Port:0/8][Eport State=
E_A0_GET_DOMAIN_ID]
[328][day month date time year][I][Eport Port: 0/8][FSPF PortUp state=0]
[329][day month date time year][I][Eport Port: 0/8][Sending init hello]
[330][day month date time year][I][Eport Port: 0/8][Processing EFP, oxid=
0x8]
[331][day month date time year][I][Eport Port: 0/8][Eport State =
E_A2_IDLE]
[332][day month date time year][I][Eport Port: 0/8][EFP,WWN=
0x100000c0dd00b845,
len= 0x30]
[333][day month date time year][I][Eport Port: 0/8][Sending LSU
oxid=0xc:type=1]
[334][day month date time year][I][Eport Port: 0/8][Send Zone Merge
Request]
[335][day month date time year][I][Eport Port: 0/8][LSDB Xchg timer set]
See also set log, page 205
HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 249