HP StorageWorks 8/20q Command Line Interface Manual page 201

Examples The following is an example of the set config switch command:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> config edit
8/20q FC Switch (admin-config) #> set config switch
A list of attributes with formatting and default values will follow.
Enter a new value or simply press the ENTER key to accept the current
value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
AdminState
BroadcastEnabled
InbandEnabled
FDMIEnabled
FDMIEntries
DefaultDomainID
DomainIDLock
SymbolicName
R_A_TOV
E_D_TOV
PrincipalPriority
ConfigDescription
See also config, page 136
show config
(1=Online, 2=Offline, 3=Diagnostics)
(True / False)
(True / False)
(True / False)
(decimal value, 0-1000)
(decimal value, 1-239)
(True / False)
(string, max=32 chars)
(decimal value, 100-100000 msec)
(decimal value, 10-20000 msec)
(decimal value, 1-255)
(string, max=64 chars)
switch, page 238
HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 201
[Online ]
[True ]
[True ]
[True ]
[1000 ]
[2 ]
[False ]
[8/20q FC Switch]
[10000 ]
[2000 ]
[254 ]
[Default Config]