Copying A Group; Adding Members To A Group; Modifying A Group Member - HP StorageWorks 8/20q Command Line Interface Manual

Copying a group

To copy the contents of an existing group (group_port) to a new group (port_1), enter the group copy
command, as shown in the following example:
8/20q FC Switch (admin-security) #> group copy group_port port_1

Adding members to a group

Adding a member to a group involves specifying a group, the member worldwide name, and the member
attributes. The member attributes define the authentication method, encryption method, secrets, and fabric
binding, depending on the group type.
• For ISL member attributes, see
• For Port member attributes, see
• For MS member attributes, see
To add a member to a group, enter the group add command, as shown in the following example:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> security edit
8/20q FC Switch (admin-security) #> group add Group_1
A list of attributes with formatting and default values will follow
Enter a new value or simply press the ENTER key to accept the current value
with exception of the Group Member WWN field which is mandatory.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Group Name
Group Type
Member
10:00:00:c0:dd:00:90:a3
Authentication
PrimaryHash
PrimarySecret
SecondaryHash
SecondarySecret (40 hex or 20 ASCII char value)
Binding
Finished configuring attributes.
To discard this configuration use the security cancel command.

Modifying a group member

Modifying a group member involves changing the member attributes. The member attributes define the
authentication method, encryption methods, secrets, and fabric binding, depending on the group type.
• For ISL member attributes, see
• For Port member attributes, see
• For MS member attributes, see
To change the attributes of a group member, enter the group edit command, as shown in the following
example:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> security edit
8/20q FC Switch (admin-security) #> group edit G1 10:00:00:c0:dd:00:90:a3
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
96 Device Security Configuration
Table 8.
Table 9.
Table 10.
Group_1
ISL
(WWN)
(None / Chap)
(MD5 / SHA-1)
(32 hex or 16 ASCII char value)
(MD5 / SHA-1 / None)
(domain ID 1-239, 0=None)
Table 8.
Table 9.
Table 10.
[00:00:00:00:00:00:00:00]
[None
[MD5
[
[None
[
[0
] chap
]
] 0123456789abcdef
]
]
]