Print Nos Installation Instructions - HP P3410A - NetRAID 1M RAID Controller Installation And Configuration Manual

Chapter 6
Using a Separate Workstation to Create NOS-specific Configuration Utility Diskette
1. If you created the NOS drivers diskette(s) on the PC workstation, the
Diskette Library screen is displayed. If you need to display the Diskette
Library, refer to "Using a Separate Workstation to Create Drivers Diskette
and Instructions" earlier in this chapter.
2. On the Diskette Library screen, double-click one of the following:
For Windows NT or Windows 2000, select NetRAID Software—
NT/Win2000.
For NetWare, select NetRAID Software—NetWare.
Follow the onscreen instructions to create the diskette(s).
3. To exit HP Netserver Navigator, click the Exit icon in the lower left
corner of the screen.
4. Remove the HP Netserver Navigator CD-ROM from the drive.
5. Go to "Print NOS Installation Instructions" later in this chapter.
Using the HP Netserver to Create NOS-specific Configuration Utility Diskette
To use the HP Netserver to create the diskette(s) needed to install the
NOS-specific utility for Windows NT, Windows 2000, or NetWare:
1. From the HP Navigator Main Menu, choose Diskette Library.
2. From the Diskette Library, do the following:
For Windows NT or Windows 2000, create the utility diskette by
selecting NetRAID Software—NT/Win2000 in the diskette library.
For NetWare, select NetRAID Software—NetWare in the diskette
library.
3. Follow the onscreen instructions to create the NOS-specific diskette.
4. Remove the HP Netserver Navigator CD-ROM and click Exit to restart
the HP Netserver.

Print NOS Installation Instructions

If you saved the Network Operating System Installation Instructions or NOS
Installation Instructions to diskette, print them now. In Step J, you will follow
these instructions to load the drivers from the driver diskette.
HP NetRAID Software
71