Managing Servers Over The Network; Adapter Management; Features; Nos Requirements - HP P3410A - NetRAID 1M RAID Controller Installation And Configuration Manual

9 Managing Servers Over the Network

This chapter describes the installation and use of software to manage the
HP NetRAID-1M or 2M adapters including integrated HP NetRAID controllers
installed over a network. It lists features of the software, identifies the operating
systems it supports, details installation instructions, and shows how to get started.
It contains instructions for servers running Microsoft Windows NT or Windows
2000 and Novell NetWare.

Adapter Management

Features

In a networked environment, it is desirable to access and manage servers from
clients or other servers. The HP NetRAID management software allows clients or
servers to manage integrated HP NetRAID controllers and HP NetRAID-1M or
2M adapters installed in servers on the network. Its key features include the
following:
HP NetRAID Assistant GUI management utility
Support for servers running Microsoft Windows NT, Windows 2000, or
Novell NetWare
Support for clients running Microsoft Windows NT, Windows 2000, or
Windows 95/98
Full access or view only modes
Password authentication

NOS Requirements

The following NOS versions are supported for managing HP NetRAID-1M and
HP NetRAID-2M over the network:
Microsoft Windows 2000
Microsoft Windows NT versions 3.51 and 4.0
Microsoft Windows versions 95 and 98 (for clients only)
Novell NetWare versions 4.2 and 5.x
107