Other Requirements; Understanding Hp Netraid Network Utilities - HP P3410A - NetRAID 1M RAID Controller Installation And Configuration Manual

Hp netraid 1m/2m installation & configuration
Hide thumbs Also See for P3410A - NetRAID 1M RAID Controller:
Table of Contents

Advertisement

Chapter 9

Other Requirements

Before installing the software for HP NetRAID management, ensure that the
network is operating and that all of the following have been done:
HP NetRAID-1M or 2M adapters and any integrated HP NetRAID
controllers are configured in all servers to be managed. (See Chapter 5,
"Installation and Configuration," of this guide for instructions.)
NOS-specific HP NetRAID drivers are installed in all servers. (See
Chapter 6, "HP NetRAID Software," of this guide for instructions.)
TCP/IP is configured and operational on all clients and servers.
You must know the server names and their IP addresses.

Understanding HP NetRAID Network Utilities

The software that lets you manage HP NetRAID-1M or 2M adapters and
integrated HP NetRAID controllers over a network is built on remote procedure
calls (RPC) using TCP/IP protocol. In NetWare 5.x, sockets are used instead of
RPC. The HP NetRAID network utilities include the following:
HP NetRAID Assistant is the GUI utility that provides a user interface to
the adapters in the servers on the network. This utility can run on either
clients or servers on the network.
HP NetRAID Access Service is installed on all servers with
HP NetRAID-1M and 2M adapters or integrated HP NetRAID controllers
that will be managed over the network. This utility makes the server and
its integrated HP NetRAID controller or HP NetRAID adapters, accessible
to a client or another server running HP NetRAID Assistant.
HP NetRAID Registration Server is installed on one server or client,
and it maintains the list of servers that can be accessed over the network.
When the servers start, they check in with the Registration Server, which
keeps track of the servers available for access by HP NetRAID Assistant.
When HP NetRAID Assistant is started, it obtains the list of available
servers from the Registration Server. Each network requires one
Registration Server in order to support the HP NetRAID network utilities.
Managing Servers Over the Network
109

Advertisement

Table of Contents
loading

Table of Contents