HP P3410A - NetRAID 1M RAID Controller Installation And Configuration Manual page 57

Chapter 5
Steps H and I only describe the features of the HP NetRAID Assistant needed to
configure the adapter initially. Refer to the HP NetRAID Series User Guide in
Information Assistant for more information about HP NetRAID Assistant.
The HP NetRAID Assistant window contains the following features from top to
bottom:
Menu bar: The menu bar activates pull-down menus for Configuration,
Adapter, Physical Drives, Logical Drives, Progress, and Help.
Toolbar: The toolbar icons are separated into four categories of functions:
Configuration, Properties, Miscellaneous, and Other. They provide
shortcuts to access the menu options.
Display
Print
Wizard
Clear
CONFIGURATION
Figure 5-4. HP NetRAID Assistant Main Menu Toolbar Options
Adapter box: The Adapter box shows the number of the current adapter
that is being configured. If the HP Netserver contains more than one
adapter, you can change the current adapter by using the Adapter box
pull-down list.
Adapter Rebuild Rate
Physical Drive
Logical Drive
PROPERTIES MISCELLANEOUS
Installation and Configuration
Rescan Exit
Help
49