Make The Installation Disk, If Necessary - HP P3410A - NetRAID 1M RAID Controller Installation And Configuration Manual

Chapter 9

Make the Installation Disk, If Necessary

The files needed to install the HP NetRAID Network utilities can be found on the
following utilities diskette(s) created by the HP Netserver Navigator CD-ROM:
For Microsoft Windows NT, Windows 2000, and Windows 95/98, there
are two diskettes titled "NetRAID Software—NT/Win2000."
For Novell NetWare, there is one diskette titled "NetRAID Software—
NetWare."
If you do not have these diskettes, you can generate them using the HP Netserver
Navigator CD-ROM in either of two ways:
On a separate PC workstation running Windows 95, 98, NT, or 2000
and having a CD-ROM drive and mouse: Refer to "Using a Separate
Workstation to Create Network Utilities Diskette" later in this chapter.
On the HP Netserver you are configuring: Refer to "Using the
HP Netserver to Create Network Utilities Diskette" later in this chapter.
Using a Separate Workstation to Create Network Utilities Diskette
To use a separate PC workstation to create the HP NetRAID network utilities
diskette(s), do the following:
1. Turn on the workstation and monitor, if they are not already on, and log
on if necessary.
2. Insert the HP Netserver Navigator CD-ROM into the drive. HP Netserver
Navigator should start automatically if automatic startup is enabled for the
CD-ROM drive. If not, double-click launch32.exe on the CD-ROM to
launch HP Netserver Navigator. It looks different from HP Netserver
Navigator running on the HP Netserver.
3. On the Netserver Navigator screen's drop-down menu of HP Netservers,
click the HP Netserver you are configuring. Then click the arrow in the
lower right corner of the screen.
4. On the Netserver Navigator menu of NOSs, click the NOS you plan to
install. Then click the arrow in the lower right corner of the screen.
5. The Netserver Navigator Main Menu is displayed. Click Guide to
Configure Server.
112
Managing Servers Over the Network