HP P3410A - NetRAID 1M RAID Controller Installation And Configuration Manual page 105

Chapter 7
7. From the Logical Drive menu for the drive you want to prepare, choose
Properties.
8. Choose Virtual Sizing.
9. On the Virtual Size menu, choose Disable, and confirm your choice.
10. Press Esc twice to return to the Logical Drive menu.
If you need to enable virtual sizing on another logical drive, choose the
logical drive and repeat steps 6 through 10.
11. If there is more than one HP NetRAID-1M or 2M adapter installed
(including any integrated HP NetRAID controller), press Esc to return to
the Objects menu. Enable virtual sizing on the logical drives of all
adapters as necessary.
12. To exit, press Esc until you see the Exit? box, and choose Yes.
Preparing for Online Capacity Expansion
97