Hp Netraid Express Tools - HP P3410A - NetRAID 1M RAID Controller Installation And Configuration Manual

Chapter 10
NOTE
SCSI ID 5 is reserved for the SAF-TE processor that manages
the hot-swap mass storage cage.
a SAF-TE processor. The number of the reserved SCSI ID
varies with the type of external enclosure.
For complete instructions on using HP NetRAID Config, see the HP NetRAID
Series User Guide in Installation Assistant on the HP Netserver Navigator
CD-ROM.

HP NetRAID Express Tools

HP NetRAID Express Tools is a text-based configuration utility that is contained
in the adapter firmware and available to all network operating systems.
HP NetRAID Express Tools contains some advanced management features that
are not available with HP NetRAID Assistant or HP NetRAID Config.
To start HP NetRAID Express Tools:
1. Log off all users, close all applications, and power down the HP Netserver.
2. Reboot the HP Netserver.
3. When the following prompt appears, press <Ctrl> + <M>.
Option: Experienced users may press <Ctrl> + <M>
for HP NetRAID Express Tools now.
Firmware Initializing
NOTE
SCSI ID 5 is reserved for the SAF-TE processor that manages
the hot-swap mass storage cage.
a SAF-TE processor. The number of the reserved SCSI ID
varies with the type of external enclosure.
Understanding HP NetRAID Utilities
For internal mass storage in some HP Netservers,
For external mass storage, a SCSI ID may be reserved for
The SAF-TE processor is displayed as PROC.
For internal mass storage in some HP Netservers,
For external mass storage, a SCSI ID may be reserved for
The SAF-TE processor is displayed as PROC.
125