Make Nos-Specific Configuration Utility Diskette - HP P3410A - NetRAID 1M RAID Controller Installation And Configuration Manual

Chapter 6
3. From the Configuration Assistant menu, choose Custom Setup.
4. From the Custom Setup menu, choose Drivers Diskette Creation.
5. From the Drivers Diskette Creation window, select the diskette to create,
click the Create Diskette button, and follow the onscreen instructions.
6. When the driver diskette is complete, click Back to return to the Custom
Setup menu.
7. From the Custom Setup menu, choose NOS Install Instructions.
8. On the NOS Install Instructions window, click Save to Disk. Later in
Step I, you will print the Network Operating System Installation
Instructions.
9. Click Done to return to Custom Setup, and click Back to return to the
Main Menu.

Make NOS-specific Configuration Utility Diskette

If you plan to install Windows NT, Windows 2000, or Novell NetWare, you must
make another diskette containing the NOS-specific configuration utility.
NOTE
You can skip this step if you plan to install SCO UnixWare, or
SCO OpenServer. The NOS-specific configuration utility was
already copied to the drivers diskette(s). Go to "Print NOS
Installation Instructions" later in this chapter.
You can use the HP Netserver Navigator CD-ROM to create the diskette(s)
containing the NOS-specific configuration utility in either of two ways:
On a separate PC workstation running Windows 95, 98, NT, or 2000
and having a CD-ROM drive and mouse: Refer to "Using a Separate
Workstation to Create NOS-specific Configuration Utility Diskette " later
in this chapter.
On the HP Netserver you are configuring: Refer to "Using the
HP Netserver to Create NOS-Specific Configuration Utility Diskette" later
in this chapter.
70
HP NetRAID Software