Page of 10

HP D7171A - NetServer - LPr Installation Manual

Installing ibm os/2 e-business on an hp netserver.
Hide thumbs
   
IBM OS/2 Warp Server for e-Business
Installation Guide for Hewlett-Packard
NetServers
NOTICE: The information in this document was last updated for the HP NetServer Navigator CD-ROM version L.17.01. If you
don't have the L.17.01 version CD-ROM and you're obtaining this document from the HP NetServer web site as a reference to
install an operating system, be sure to also check the HP NetServer web site for the latest available drivers.
┬ęCopyright Hewlett-Packard Company
September 7, 1999
(This document is only available in English.)
Introduction
The objective of this document is to help Hewlett-Packard customers install IBM OS/2 Warp
Server for e-business on a HP NetServer system. For additional information on Hewlett-Packard
NetServers refer to the HP Information Assistant on the HP NetServer Navigator CD-ROM.
It is critical to know which disk adapters or disk array adapter are in the system before you start
the installation. The tables in the Appendix will help you identify what adapter is implemented or
embedded on the system board for each HP NetServer.
NOTE: The IBM OS/2 Warp Server for e-business is not supported on the HP NetServer
E series (E 30, E 40, E 45, E 50, and E 60).
Table of Contents
Installation Procedure: OS/2 Warp Server for e-business
Requirements
Creating the HP Drivers/Utilities Diskette
APPENDIX
Installation Procedure: OS/2 Warp Server for e-business
Requirements
Driver's Diskette for OS/2 Warp Server for e-business created from the HP NetServer
Navigator CD diskette library.
OS/2 Warp Server for e-business CD
1

Advertising

   Related Manuals for HP D7171A - NetServer - LPr

   Summary of Contents for HP D7171A - NetServer - LPr

  • Page 1

    (This document is only available in English.) Introduction The objective of this document is to help Hewlett-Packard customers install IBM OS/2 Warp Server for e-business on a HP NetServer system. For additional information on Hewlett-Packard NetServers refer to the HP Information Assistant on the HP NetServer Navigator CD-ROM.

  • Page 2

    Installation diskettes (to create installation diskettes from OS/2 CD insert you OS/2 CD in the CD-ROM drive and type CDINST). NOTE: I2O Mode is not supported by IBM OS/2 operating system, If there is a NetRAID adapter in the system set the NetRAID mode to Mass-Storage using Set Class utility or NetRAID's utility (Ctrl+M) before installing OS/2.

  • Page 3

    6. Read the information provided on the "Configuration Advisor" panel. Save the information to a floppy diskette if you desire. 7. Select Continue. 8. From the "Custom Configuration" menu select "Create Drivers Diskette". 9. Label a blank diskette "HP NetServer IBM OS/2 Warp Drivers/Utilities Diskette". Insert this diskette in drive A and select "Execute".

  • Page 4: Installation Steps

    added in Task 5 and delete drivers entry which are removed in Task 2. Task 7) Include "set copyfromfloppy=1" as the first line in config.sys in "Work Diskette 1" to allow the installation process to copy drivers from floppy than from OS/2 Installation CDROM. Installation Steps 1.

  • Page 5

    20. Select a size in megabytes for the partition and press Enter. NOTE: If boot drive will be formatted as FAT, it should be less than 2GB. 21. Highlight the volume you just created and press Enter. 22. Select Set the Volume Installable and press Enter. 23.

  • Page 6

    the Server Component installation. 41. At Information Screen, Do Not enter anything and click on Next. 42. At the Services screen, accept the default and click on Next. 43. At the Configuration screen, click on UserID and Password: Enter USERID for UserID Enter PASSWORD for Password 44.

  • Page 7

    E 50 AIC7880 AIC7870.ADD E 60 AIC7895 AIC7870.ADD SYM895 SYM8XX.ADD * (SE stands for Single Ended) Table #2 List of Hewlett-Packard Disk Array adapters and Drivers. NetServer Adapter Name Driver Name ========= ============= =========== E 30 NetRaid mraid.add E 40 NetRaid mraid.add...

  • Page 8

    LH II NetRaid mraid.add LH 3 NetRaid (*) mraid.add LH 4 NetRaid (*) mraid.add LH 3000 NetRaid (*) mraid.add LM (All) Mylex EISA 3609A hpda.add LS (All) Mylex PCI C3610A hpda.add NetRaid mraid.add LXr Pro8 NetRaid mraid.add NetRaid mraid.add LXr 8000 NetRaid mraid.add LXr 8500...

  • Page 9

    LH Pro Trident 9000i 512K LH II Trident 9000i 512K LH 3 Cirrus CL5446 1M LH 4 Cirrus CL5446 1M LH 3000 ATI Rage IIC 2M LM (All) Western Digital 512K LS (All) Cirrus 5436 512K Cirrus 5436 512K LXr Pro8 S3 Virge Cirrus CL5446 1M LXr8000...

  • Page 10

    LD Pro SCSI SCSI SCSI LH Pro SCSI LH II SCSI LH 3 LH 4 LH 3000 LM (All) SCSI LS (All) SCSI SCSI LXr Pro8 LXr 8000 LXr 8500...

Comments to this Manuals

Symbols: 0
Latest comments: