Start Hp Netraid Assistant - HP P3410A - NetRAID 1M RAID Controller Installation And Configuration Manual

Chapter 9
2. HP NetRAID Registration Server: Start it before the others by
double clicking on its Windows icon or by loading NetWare module
reg_serv.nlm .
3. HP NetRAID Access Service: Start it by double clicking on its Windows
icon or by loading NetWare module raidserv.nlm .
NOTE
To change the password for a server using Windows NT or
Windows 2000, run setpass.exe under
\netraid\dll\ .
To change the password for a server using NetWare, reinstall
the HP NetRAID management software, as described in this
chapter, with the new password.

Start HP NetRAID Assistant

Run HP NetRAID Assistant from a client or server in which the HP NetRAID
Assistant utility was installed.
To start HP NetRAID Assistant under Windows 95 or 98, click the
HP NetRAID Assistant icon in the HP NetRAID program group (or group
you specified).
To start HP NetRAID Assistant under Windows NT or Windows 2000,
click the Start button, point to Programs, point to HP NetRAID in the
Programs menu, and click HP NetRAID Assistant.
If HP NetRAID Assistant is started on a standalone server, the main window
(shown in Figure 9-1) is displayed immediately.
Managing Servers Over the Network
119