Download Print this page
HP P3410A - NetRAID 1M RAID Controller Read This First
HP P3410A - NetRAID 1M RAID Controller Read This First

HP P3410A - NetRAID 1M RAID Controller Read This First

Read this first: hp netraid-1m/2m installation update sheet
Hide thumbs Also See for P3410A - NetRAID 1M RAID Controller:

Advertisement

Quick Links

READ THIS FIRST: HP NetRAID-1M/2M Installation
Update Sheet
Situation
A new release of HP NetRAID-1M/2M software is now available for download from the driver download section of
the HP website at: www.hp.com, and on the NetRAID Software Library CD included with the NetRAID-1M/2M
accessory kits (P3410A, P3411A, P3411B, P3475A, P3475B). This release provides a number of bug fixes and
feature enhancements that are documented in the release notes that accompany the new NetRAID-1M/2M software.
Before performing this installation or update, take note of the following:
The HP DS2300 is compatible only with this new release of the HP NetRAID-1M/2M firmware
(H.02.01). Older versions of firmware will not allow the NetRAID-1M/2M to operate correctly with the
HP DS2300. Therefore, it is critical to update to this new version (H.02.01) of HP NetRAID-1M/2M
firmware if connecting a HP DS2300 to the controller.
A new set of HP NetRAID-2M products with a `B' suffix (P3411B 64 MB and P3475B 128 MB) is required
for use with the HP tc3100 and tc4100 servers. The original HP NetRAID-2M products (P3411A, P3475A)
are not supported in these two servers due to an intermittent system hang with loss of video, which may
occur during boot up. The problem may go away upon a power cycle and it does not affect run time operation
of the card. Either the original HP NetRAID-2M `A' products (P3411A 64 MB and P3475A 128 MB) or the
new NetRAID-2M 'B' products (P3411B 64 MB and P3475B 128 MB) may be used in all other server
models.
One Button Disaster Recovery (OBDR) is not a supported feature in this software release. Even though
OBDR options appear in many of the menus within the NetRAID utilities this feature is NOT supported and
may not function properly if used.
This new release of NetRAID-1M/2M software is cluster certified.
This document and software only applies to HP IA-32 servers.
Solution

Getting Started

The following documents and software are needed for the installation/update of the NetRAID-1M/2M:
HP NetRAID-1M/2M Installation Update Sheet (Hardcopy included with accessory kit)
HP NetRAID-1M and NetRAID-2M Installation and Configuration Guide (Hardcopy included with
accessory kit)
HP NetRAID Series User Guide (Located on HP Netserver Online Documentation CD-ROM, version
D.24.00 and on HP website)
The newest release of NetRAID-1M/2M software (Available from the HP NetRAID Software Library CD or
from the HP website)
Follow these steps to install a new NetRAID-1M/2M or to update the currently installed NetRAID-1M/2M software.
Some steps are required only for a new install and not for an update, so take note of these exceptions where indicated.
HP Part Number 5990-4053
Printed in June 2002
Page 1 of 5
*5990-4053*

Advertisement

loading

Summary of Contents for HP P3410A - NetRAID 1M RAID Controller

  • Page 1: Getting Started

    READ THIS FIRST: HP NetRAID-1M/2M Installation Update Sheet Situation A new release of HP NetRAID-1M/2M software is now available for download from the driver download section of the HP website at: www.hp.com, and on the NetRAID Software Library CD included with the NetRAID-1M/2M accessory kits (P3410A, P3411A, P3411B, P3475A, P3475B).
  • Page 2 HP NetRAID-1M and NetRAID-2M Installation Update Sheet A. Update the firmware on any other NetRAID controllers that are installed in the same HP server as the new NetRAID-1M/2M controller, if needed. (New Install or Update) B. Install the new NetRAID-1M/2M hardware into the HP server. (New Install Only) C.
  • Page 3 HP NetRAID-1M and NetRAID-2M Installation Update Sheet For the HP NetRAID-3Si (D5955A), HP NetRAID-1Si (D2140A), Integrated NetRAID or the HP NetRAID- 1M/2M (P3410A, P3411A, P3411B, P3475A, P3475B), update the firmware to the versions listed in the table above. The required firmware versions can be downloaded from the location listed above. For the HP NetRAID-1 (D4992A), NetRAID (D4943A) (including the cluster version), and NetRAID-3Si (D5955A) (cluster version only), press <Ctrl><M>...
  • Page 4 HP NetRAID-1M and NetRAID-2M Installation Update Sheet Option: Experienced users may press <Ctrl> <M> for HP NetRAID Express Tools now. NOTE HP NetRAID Express Tools will start after all the system BIOS POST completes. Refer to the HP NetRAID Series User Guide, step C in Chapter 4 (titled “HP NetRAID Express Tools”), to complete the following tasks.
  • Page 5 HP NetRAID-1M and NetRAID-2M Installation Update Sheet HP NetRAID Software Library CD NetRAID-1M/2M Software Versions The following table lists the versions of all the software components that are part of this new release. This software is available on the NetRAID Software Library CD included with the NetRAID-1M/2M accessory kits (P3410A, P3411A, P3411B, P3475A, P3475B) and on the HP website at www.hp.com.