HP P3410A - NetRAID 1M RAID Controller Installation And Configuration Manual page 147

Chapter 14
1 Logical Drive Failed
Problem: One logical drive failed to sign on.
Suggested solution:
1. Verify that all physical drives are connected and powered on.
2. Use a utility, such as HP NetRAID Assistant or HP NetRAID Config, to
determine which physical drives are not responding and thereby make the
logical drive unavailable.
3. Correct the problem with the physical drive by reconnecting, replacing, or
rebuilding it.
x Logical Drives Degraded
Problem: x number of logical drives signed on in the degraded (critical) state.
Suggested solution:
1. Use a utility, such as HP NetRAID Assistant or HP NetRAID Config, to
determine which physical drive(s) is not responding and thereby makes
the logical drives degraded.
2. Correct the problem with the physical drive(s) by reconnecting, replacing,
or rebuilding the physical drive(s).
1 Logical Drive Degraded
Problem: One logical drive signed on in the degraded (critical) state.
Suggested solution:
1. Use a utility, such as HP NetRAID Assistant or HP NetRAID Config, to
determine which physical drive is not responding and thereby makes the
logical drive degraded.
2. Correct the problem with the physical drive by reconnecting, replacing, or
rebuilding it.
Insufficient Memory to Run. Press any Key to Continue ...
Problem: There is insufficient memory in the HP Netserver to run the
HP NetRAID BIOS.
Suggested solution: Check the HP Netserver to be sure that the memory is
properly installed.
Troubleshooting
139