To connect the probe adapter to the HP E2487A Preprocessor Interface
To connect the probe adapter to the HP E2487A
Preprocessor Interface
The probe adapter has five high-density connectors, labeled Cable P1
through Cable P5. The HP E2487A Preprocessor Interface also has five
high-density cables, labeled P1 through P5. Connect the preprocessor cables
to the correspondingly-numbered probe adapter connectors.
To prevent equipment damage, you must connect the preprocessor interface
C A U T I O N
cables to the probe adapter before connecting the probe adapter to the
target system.
To prevent equipment damage, when disconnecting the preprocessor
C A U T I O N
interface from the probe adapter use the procedure on page 11.
4