Beep Codes; Beep Codes And Interpretation - HP Integrity rx4610 User Manual

Chapter 11
8C92: DIMMs mapped out: Lower Board, 9 - 12
8C93: DIMMs mapped out: Lower Board, 17 - 20
8C94: DIMMs mapped out: Lower Board, 25 - 28
8C95: DIMMs mapped out: Lower Board, 5 - 8
8C96: DIMMs mapped out: Lower Board, 13 - 16
8C97: DIMMs mapped out: Lower Board, 21 - 24
8C98: DIMMs mapped out: Lower Board, 29 - 32
8C99: DIMMs mapped out: Upper Board, 1 - 4
8C9A: DIMMs mapped out: Upper Board, 9 - 12
8C9B: DIMMs mapped out: Upper Board, 17 - 20
8C9C: DIMMs mapped out: Upper Board, 25 - 28
8C9D: DIMMs mapped out: Upper Board, 5 - 8
8C9E: DIMMs mapped out: Upper Board, 13 - 16
8C9F: DIMMs mapped out: Upper Board, 21 - 24
8CA0: DIMMs mapped out: Upper Board, 29 - 32
FFFE: Invalid Error Number
FFFF: Reached Termination during Error Processing

Beep Codes

Beep Codes and Interpretation

Speaker beep code generation is supported on standby and when the system is
powered up. The BMC may emit the beep codes listed in the table below. The
waveform below describes the timing and the sequence of the Beep code 1-5-1-1--
-1 for power supply configuration failed to retain 3+1 redundancy.
178
Troubleshooting