HP Integrity rx4610 User Manual page 128

Chapter 10
EMP Feature
Modem ESC
Sequence
Modem Phone
Number
Set Password
120
Description
The Modem ESC Sequence string is sent to the modem
before sending a command string to the modem. The
maximum length is 8 bytes and it is usually set to "+++".
Enter the phone number of the modem connected to this
server. The maximum length is 32 bytes. The Modem
Phone Number can be retrieved and reported via in-band
management connections.
If set, this password restricts EMP access through the
direct serial connection or modem. Select the Set
Password button to display the password setup page for
clearing or setting the password. You must select
<Save> in the previous setup page to clear or set the
new password to the BMC.
Valid characters for this password are A-Z, a-z, and 0-9.
The maximum line-length allowed is 16 characters.
The password setup page consists of two edit boxes, one
to enter a password, another to confirm, and an <OK>
button. If a password already exists, both of the edit
boxes display "********". To clear the old password,
clear both edit boxes by selecting each box and pressing
the <Backspace> key. To set a new password, enter
the new password in both of the edit boxes. Select the
<OK> button when done to go back to the previous setup
page.
Configuring the HP Server