HP Integrity rx4610 User Manual page 135

Chapter 10
BIOS Setup Advanced Screen Menu Items
Primary Menu Sub Menu
Item Items
Serial Port B
Parallel Port
Mode
Onboard SCSI
Onboard NIC
Configuring the HP Server
Value Description
[Auto] Determines Serial Port B
Enable configuration at boot
Disable time. Auto causes the
server to determine the
Base I/O address and
interrupt to use for the
port. Enable requires you
to supply the Base I/O
address and the interrupt
value. Disable causes the
server to disable the port.
[Auto] Determines Parallel Port
Enable configuration at boot
Disable time. Auto causes the
server to determine the
Base I/O address and
interrupt to use for the
port. Enable requires you
to supply the Base I/O
address and the interrupt
value. Disable causes the
server to disable the port.
[Bi-directional] Defines the transfer mode
Output Only for the Parallel Port. Bi-
EPP directional allows data
ECP transfer to and from the
serve. Output Only allows
data transfer from the
server only. EPP specifies
Enhanced Parallel Port
mode. ECP specifies
Enhanced Port mode.
[Enabled] Enables or disables the
Disabled onboard SCSI.
[Enabled] Enables or disables the
Disabled onboard NIC.
127