HP Integrity rx4610 User Manual page 183

Chapter 11
8151: Processor in socket M1: failed initialization on last boot
8152: Processor in socket M2: failed initialization on last boot
8153: Processor in socket M3: failed initialization on last boot
8190: Watchdog timer failed on last boot
8191: 2:1 core to bus speed ratio: Processor L2 cache disabled
8192: L2 cache size mismatch
8193: CPUID, Processor stepping are different
8194: CPUID, Processor family are different
8195: Front side bus speed mismatch. System Halted
8196: CPUID, Processor model are different
8300: Baseboard Management Controller failed to function
8305: Hotswap Controller failed to function
84F1: Intelligent System Monitoring Forced Shutdown
84F2: Server Management Interface Failed
84F3: Baseboard Management Controller in Update Mode
84F4: Sensor Data Record Empty
84FF: System Event Log Full
8C02: ERRORS FOUND IN MEMORY SUBSYSTEM. FAILING
ROWS WILL BE MAPPED OUT ON THE NEXT RESET. IT IS
STRONGLY SUGGESTED THAT YOU RESET THE SYSTEM
NOW. ALLOWING THE SYSTEM TO CONTINUE TO BOOT
MAY RESULT IN UNSTABLE SYSTEM BEHAVIOR AND/OR
HARD DISK CORRUPTION.
8C51: Error in memory subsystem: Lower Board, DIMM 1
8C52: Error in memory subsystem: Lower Board, DIMM 2
8C53: Error in memory subsystem: Lower Board, DIMM 3
8C54: Error in memory subsystem: Lower Board, DIMM 4
8C55: Error in memory subsystem: Lower Board, DIMM 5
8C56: Error in memory subsystem: Lower Board, DIMM 6
8C57: Error in memory subsystem: Lower Board, DIMM 7
Troubleshooting
175