HP Integrity rx4610 User Manual page 209

Appendix A
Table A-3. Weight and Dimensions
Weight
Height
Width
Depth
Required front
clearance
Required rear
clearance
Heat Dissipation
Table A-4. HP Server Hardware Specifications
Up to four 733 MHz/2 MB or up to four 800 MHz/ 4 MB Intel
Processors
Itanium processors, packaged in Slot M pin array cartridges.
Chipset
QLogic chip set with 66/133 MHz bus speed support
Two plug-in boards containing main memory supporting PC100
Memory
Version 1.2 buffered SDRAM. DIMM sizes supported are 256
MB, 512 MB, and 1 GB. Each memory board supports from 1
GB to 32 GB of error correction code memory using 32 72-bit
dual inline memory modules. The boards interface to the
processors via connectors on each side of the processor board.
ATI RAGE XL super video graphics array controller with 16
Video
MB of video memory.
SCSI
The Qlogic ISP 12160 LVDS embedded dual channel controller
supports the internal SCSI drives and is connected to the SCSI
backplane; the second LVDS channel is routed to the rear of the
server to support external devices.
IDE
Contained on the Legacy I/O Board, the two IDE buses support
the diskette drive on Primary IDE 0 and the DVD drive on
Secondary IDE 1.
Eight 64-bit/66 MHz Hot Plug PCI I/O expansion slots.
PCI Bus
Two 64-bit/33 MHz PCI expansions slots.
Approx. 150 lbs (68.1 kg.), depending on
configuration – excludes keyboard and monitor.
31.12 cm (12.25 inches, 7U)
44.45 cm (17.5 inches)
71.12 cm (28.0 inches)
7.62 cm (3 inches)
20.32cm (8 inches)
6174 BTU/hr
Specifications
201