HP Integrity rx4610 User Manual page 136

Chapter 10
BIOS Setup Advanced Screen Menu Items
Primary Menu Sub Menu
Item Items
IDE IDE Controller
Configuration
Hard Disk
Pre-Delay
Primary IDE
Master
128
Configuring the HP Server
Value Description
[Both] Selects the IDE controller
Disabled and hard disk drive type
Primary installed in your system.
Secondary Both enables both IDE
controllers. Disabled
disables the integrated
IDE controller. Primary
enables only the primary
controller. Secondary
enables only the
secondary controller.
[Disabled] Enabled selects the hard
disk drive pre-delay. This
3, 6, 9, 12, 15,
causes the BIOS to insert
21, 30 Seconds
a delay before attempting
to detect IDE drives in the
system. Disabled disables
the pre-delay.
[drive_id] A drive-specific identifier
Not Installed for the primary IDE
master device currently
installed in the system.
Clicking on the value
displays two subsequent
sub-menu items: Type
and Use ARMD Drive
As. Type specifies how
the server perceives the
device (automatically or
as an ATPI device). Use
ARMD Drive As
specifies how to use the
device (floppy or hard
drive).