HP Integrity rx4610 User Manual page 134

Chapter 10
Advanced
Table 10-5 describes the menu items available on the Advanced screen. Five
menu items exist on this screen. Each of these items contains sub-menus that in
turn can also lead to subsequent sub-menus. Default values appear in brackets.
Table 10-5. BIOS Setup Advanced Screen Menu Items
BIOS Setup Advanced Screen Menu Items
Primary Menu Sub Menu
Item Items
Boot Plug & Play O/S
Configuration
Reset Config
Data
Numlock
ADM Graphics
Mode
Peripheral Serial Port A
Configuration
126
Configuring the HP Server
Value Description
Configures boot settings.
[No]
If the operating system
Yes
that runs on the server
supports plug and play
operation, set this value to
Yes.
Resets the configuration
[No]
data after a reboot
Yes
operation.
Locks the number keypad.
[Off]
On
Enables or disables the
[Disabled]
ADM graphics mode.
Enabled
[Auto] Determines Serial Port A
Enable configuration at boot
Disable time. Auto causes the
server to determine the
Base I/O address and
interrupt to use for the
port. Enable requires you
to supply the Base I/O
address and the interrupt
value. Disable causes the
server to disable the port.