Removing And Installing Memory Boards; Removing Memory Boards - HP Integrity rx4610 User Manual

Chapter 5
Figure 5-3. Memory Board DC-DC Converters

Removing and Installing Memory Boards

Two Memory Boards reside in the Processor/Memory Complex: one is on top of
the complex and the other underneath. You can remove or install these memory
boards.

Removing Memory Boards

Two memory boards exist, one plugged in to each side of the processor board (the
top and the underside of the Processor/Memory Complex). The following
procedure describes the removal process for either memory board. To remove the
memory board, complete the following procedure:
1. Open and remove the Processor/Memory Complex.
2. If desired, remove the DIMMs from the memory board you are removing
as described in "Removing DIMMs" in Chapter 5.
3. Remove the DC-DC converters from the memory board as described in
"Removing the Memory Board DC-DC Converters" in Chapter 5.
Installing Additional Memory
45