Server Management Configuration Utility - HP Integrity rx4610 User Manual

Chapter 10
Command
mkdir dir [dir]
mm address [Width] [;Type]
mode [col row]
mount BlkDevice [sname[:]]
PalProc arg1 [arg2] [arg3] [arg4]
pause
pci [bus_dev] [func]
reset [/warm] [reset_string]
rm file/dir [file/dir]
set [-bdv] [sname] [value]
stall microseconds
time [hh:mm:ss]
type [-a] [-u] [-b] file
ver
vol fs [volume_label]

Server Management Configuration Utility

The Server Management Configuration Utility (SM Config) is an EFI-based
program used to view or modify the Server Management firmware configuration
data. The firmware configuration is maintained by the BMC. The executable
program for the utility is named SMconfig.efi. SM Config provides the following
functions:
•
Configure the Emergency Management Port (EMP) for remote server
management over a modem or direct serial connection.
•
Configure the Direct Platform Control over LAN feature (DPC\LAN) for
remote server management over the network.
•
Configure power restoration policies when the system loses AC power.
•
Set the accelerated cool-down timeout.
•
Set the Fault Resilient Boot (FRB) timeout.
•
Configure the Advanced Configuration and Power Interface (ACPI)
features.
•
Enable or disable Platform Event Filtering (PEF) and Platform Event
Paging (PEP).
Configuring the HP Server
Description
Makes a directory
Memory Modify: Mem, MMIO, IO, PCI
Sets or gets the current text mode
Mounts a file system on a block device
Makes a PAL call
Prompt to quit or continue (scripts only)
Displays PCI device information
Performs a cold or warm reset
Removes files or directories
Sets or gets environment variables
Delays for the specified number of
microseconds
Gets or sets the time
Displays the contents of a file
Displays version information
Sets or displays a volume label
113