HP Integrity rx4610 User Manual page 224

Appendix A
JTAG Select1 Settings
Jumper block J2E3 selects combinations of the processor, supporting chip set,
memory, and I/O as routes for JTAG TDI and TDO signals. The default jumper
setting allows only JTAG TDI and TDO signals to be routed through the
processor. Figure A-10 shows the jumper settings.
J2E3
M3TDO 1 SACTDI
ITPTDO SDCTDO
MEMIOTDO_GTL MEMATDI
NC NC
A
Figure A-10. JTAG Select1 Jumper Settings
Jumper diagram labeled:
A. Processor Only (Default Setting)
B. Processor and Supporting Chip Set
C. Processor, Supporting Chip Set, Memory, and I/O
216
J2E3
M3TDO 1 SACTDI
ITPTDO SDCTDO
MEMIOTDO_GTL MEMATDI
NC NC
B
Specifications
J2E3
M3TDO 1 SACTDI
ITPTDO SDCTDO
MEMIOTDO_GTL MEMATDI
NC NC
C