Setting Functions; Paper Selection - Kyocera KM-2540 Advanced Operation Manual

press start key.
key when starting copy.
p
ded 2 sided Copy
al 1 sided/
2 sided
2 sided copy-Left
o % Top Edge Top
Finished page #:
Next copy page: Front
Original
Orient.
ality Edit
Ready to Job build.
Place originals then press Start key.
Job Build - Step
1 sided
11×8½"
Paper Original
Selection Type
Offset Auto %
Finished Zoom
Basic Quality
Copy Functions
Set
Cancel
Insert
page
Print from
Rear page
Scanning
finished
1 sided Copy
1 sided/
2 sided
1 sided copy-Left
Top Edge Top
Finished page #:
Original
Orient.
Edit
Step 6: Complete the Settings for Original D
Select Cassette 1 (plain paper) for paper setting.
17
Press [Paper Selection].
18
Select Cassette 1 and press [Close].
19
Place the Original D and press the Start key. Scanning of the
original begins.
Step 7: Specify Blank Colored Paper for the Back Cover
For paper selection, set MP tray (color paper).
20
Press [Paper Selection].
21
Select the MP tray and press [Close].
22
Press [Insert page] ([Insert blank page]).
23
All originals have been scanned. Press [Scanning finished]. Printing
begins.
24
If there are no problems with the output, use Repeat Copy to
produce additional copies as necessary. For further details, refer to
Repeat Copy on page 1-25.
This completes the steps for the above operation.

Setting Functions

This section explains the copying functions available when using Job
Build.

Paper Selection

Select the paper size.
1
Press [Basic]. On the next screen, press [Paper Selection].
2
Select the MP tray or a cassette and press [Close].
1-37