Kyocera KM-2540 Advanced Operation Manual page 51

Copy Functions
Margin/Centering
Set margin (blank borders) and centering options.
1
Press [Edit] and on the next screen press [Margin/Centering].
Note Margin/Centering setting is common to all steps. It may
only be configured as the first step.
2
Press [Margin] or [Centering]. For further details, refer to Margin
Mode on page 1-12 and Centering Originals on page 1-13.
3
Press [Close].
Page Numbering
Specify page numbering in the sequence of originals as follows.
1
Press [Edit] and on the next screen press [Page #] ([Page
numbering]).
Note Page numbering configuration is common to all steps. It
may only be configured as the first step.
2
For further details about page numbering, refer to Page Numbering
on page 1-16.
3
Press [Close].
Selecting Output Destination
The optional job separator, document finisher or built-in finisher can be
specified as copy output destinations.
1
Press [Edit] and on the next screen press [Output Tray].
Note Output destination is displayed with the optional job
separator, document finisher or built-in finisher is installed.
The output destination setting applies to all other steps. It may
only be configured as the first step.
2
Specify the output destination. For further details, refer to Selecting
Output Destination on page 1-28.
3
Press [Close].
1-41