Setting Handling For Special Media Types - Kyocera KM-2540 Advanced Operation Manual

3-16
1
Referring to Accessing the Machine Default Screen on page 3-11,
access the Machine Default screen.
2
Press [ ] or [ ] to select Select media type (2sided) and press
[Change #].
3
Press [ ] or [ ] to select the media type to adjust from Custom 1 -
Custom 8 and press [Change #].
4
Select [Off] or [On]. Press [Close] to save settings or [Back] to
cancel settings.
5
Press [Close]. The display returns to the Machine Default screen.

Setting Handling for Special Media Types

When printing on prepunched, preprinted, or letterhead paper,
depending on the original placement method or combination of copier
functions, the hole positions may not align or images may be printed
upside-down. Use this setting to change the direction of the finished
output. The setting items are as follows.
Item
Adj. Print Direction
Speed Priority
When [Adj. Print Direction] is enabled, load paper according to the
following method.
Example: Copying on letterhead paper
Original Paper
Original Paper
Note When loading paper into the cassette and MP tray, place the
surface to be printed facing up.
When [Adj. Print Direction] is enabled, the printing speed
decreases slightly.
1
Referring to Accessing the Machine Default Screen on page 3-11,
access the Machine Default screen.
2
Press [ ] or [ ] to select Special paper action mode (Specif. paper
action mode) and press [Change #].
3
Select [Adj. Print Direction] or [Speed Priority].
4
Press [Close] to save settings or [Back] to cancel settings. The
display returns to the Machine Default screen.
Description
Print with aligned finish direction.
Releases the [Adj. Print Direction] setting.
Finished Cassette
Finished Cassette
MP tray
MP tray
System Menu