Kyocera KM-2540 Advanced Operation Manual page 50

Ready to Job build.
Place originals then press Start key.
Job Build - Step
Auto
Off
Border Original Repeat
Erase Size Copy
Off Off
Margin/ Output
Page #
Centering Tray
Basic Quality
1-40
EcoPrint
Set EcoPrint to save toner consumption.
1
2
3
Border Erase
Prevents the appearance of shadows from around the edges of originals.
The setting items are as follows.
Item
Bord Erase Sheet
Individual BordrErase
1
2
Off
3
2 sided copy-Left
Top tray
Finished page #:
Edit
Selecting original size
Specify the size of the original.
1
2
3
Repeat Copy
Specify Repeat Copy as follows. Use Repeat Copy to enable the
production of additional copies as needed after a copy job is completed.
1
2
3
Press [Quality] and on the next screen press [EcoPrint].
Note EcoPrint is a common setting to all steps. It may only be
configured as the first step.
Press [On]. EcoPrint is enabled.
Press [Close].
Description
Erase black borders around the single
sheet original.
Specify border widths individually on all
sides to erase.
Press [Edit] and on the next screen press [Border Erase].
Press [Bord Erase Sheet] or [Individual BordrErase] and specify the
border width to erase. For further details, refer to Border Erase on
page 1-14.
Press [Close].
Press [Edit] and on the next screen press [Original Size].
Set the original size. For further details, refer to Selecting Original
Size on page 1-3.
Press [Close].
Press [Edit] and on the next screen press [Repeat Copy].
Note Repeat Copy setting is common to all steps. It may only
be configured as the first step.
Press [On] to activate Repeat Copy. For further details, refer to
Repeat Copy on page 1-25.
Press [Close].
Copy Functions