Default Settings - Kyocera KM-2540 Advanced Operation Manual

System Menu / Counter
System Menu
Copy
Default
Machine
Default
3-2

Default Settings

This section explains how to change default settings which are applied
when the machine is powered up or the Reset key is pressed.
Automatically configured details set in default setting mode are called
default settings. Default settings are divided between Default Settings for
Copying and Machine Default. These settings may be freely modified to
suit your usage patterns.
Default Settings for Copying
Set the following default copy settings.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Accessing the Copy Default screen
Follow the procedures below to access the Copy Default screen.
1
2
3
Job
Language
Accoun
MP Tray
Setting
Register Print
Orig. Size Report
4
Density...3-3
Density Steps...3-3
Original Image Quality...3-3
Setting EcoPrint...3-4
Adjusting Background Density...3-4
Correcting Black Lines...3-4
Paper Selection...3-5
Setting Auto Paper Selection...3-5
Selecting Media Types for Automatic Paper Selection...3-5
Selecting Default Paper Source...3-6
Specifying Paper Source for Cover...3-6
Setting Auto % Priority...3-6
Adjusting Auto Density...3-7
Adjusting Manual Density...3-7
Selecting Default Zoom...3-7
Selecting Collating and Offsetting Output...3-8
Selecting Auto Image Rotation...3-8
Setting Margin Defaults...3-8
Erasing Borders...3-9
Selecting Maximum Number of Copies...3-9
Enabling Repeat Copy...3-9
Showing the Register Key...3-10
Customize (Basic Screen)...3-10
Customize (User Choice)...3-10
Press the System Menu/Counter key.
Press [Copy Default].
Use the numeric keys to enter the 4 digit management code. The
default setting is 2500 for the 25 cpm model and 3000 for the 30 cpm
model.
If the correct management code has been entered, the Copy Default
screen will be displayed.
Note For security, it is recommended to change the
management code. For further details, refer to Changing
Management Code on page 3-20.
Refer to the following configuration items to configure the default
settings.
System Menu