Registering Non-Standard Sizes For Originals - Kyocera KM-2540 Advanced Operation Manual

System Menu / Counter
System Menu
Copy
Default
Machine
Default
3-24

Registering Non-standard Sizes for Originals

Pre-register 4 types of non-standard original sizes. Registered sizes are
shown as custom sizes when selecting the original size.
The size range that can be registered is as follows.
Model Type
Inch models
Metric models
1
2
3
4
Job
Language
Accoun
5
MP Tray
Setting
6
Register Print
Orig. Size Report
7
Range
Height: 2 - 11 5/8" (1/8" increments)
Width: 2 - 17" (1/8" increments)
Height: 50 - 297 mm (1 mm increments)
Width: 50 - 432 mm (1 mm increments)
Press the System Menu/Counter key.
Press [Register Orig. Size].
Select the number to register from Original Size (custom 1 - 4) and
press [Change #].
Press [On].
Press [+] or [–] to set the Y (height) and X (width) sizes.
Press [Close] to save settings or [Back] to cancel settings.
Press [Close]. The display is returned to the System Menu screen.
System Menu