Kyocera KM-2540 Advanced Operation Manual page 109

Display
Check waste toner box.
Replace the waste toner box.
Clean the slit glass for original
fed from DP.
(Clean the slit glass for original
fed.)
Install duplex unit.
Out of staples.
Add staples.
(Stapler empty.
Add staples.)
Time for maintenance.
Paper misfeed.
Remove paper from inner tray of
Finisher.
Staple jam.
System error.
Call service.
Paper cassette is out of order.
Select another paper cassette.
(Paper cassette is out of order.
Select other paper cassette.)
System error.
Main Power Switch Off / On.
Troubleshooting
Checkpoints
Is the waste toner box securely
fastened?
—
—
Is the duplex unit securely
installed?
Is the optional document finisher
or built-in finisher out of staples?
—
—
Is there any paper left in the
optional document finisher?
Is the optional document finisher
or built-in finisher experiencing a
staple jam?
Is it re-displayed after opening
and closing the front cover,
turning off and on the main
power switch, and plugging out
and plugging in the power plug
in the power outlet?
—
—
Corrective Actions
Securely fasten the waste toner
box.
Replace the waste toner box.
Rub the slit glass with the
included dry cleaning cloth.
Open left cover 1 and install the
duplex unit in place securely.
Refill staples.
Periodic maintenance is
required to maintain the
equipment in good condition.
Contact your Service
Representative or Authorized
Service Center promptly.
If a paper jam occurs, the
location of the jam will be
indicated on the touch panel and
the machine will stop. Leaving
the main power switched on (|
position) follow the instructions
to remove the jammed paper.
Remove all paper left in the
optional document finisher.
Remove the jammed staple.
Make a note of this message (C
followed by a number). Switch
off the power ( position),
unplug the power cord, and
contact your Service
Representative or Authorized
Service Center.
The cassette in use has a
problem and is temporarily
unavailable. Contact your
Service Representative or
Authorized Service Center
promptly. To continue copying,
use another cassette.
A system error has occurred.
Turn the main power switch off
and on again.
Reference Page
Refer to Operation
Guide, Chapter 5
Refer to Operation
Guide, Chapter 5
Refer to Operation
Guide, Chapter 5
—
Refer to Operation
Guide, Chapter 4
Refer to the
optional Document
Finisher Operation
Guide.
—
Refer to Operation
Guide, Chapter 6
—
Refer to Operation
Guide, Chapter 4
Refer to the
optional Document
Finisher Operation
Guide.
—
—
—
5-7