Setting Scanner Functions - Kyocera Mita C2525E Advanced Operation Manual

Scanner Settings

Setting Scanner Functions

This section explains how to configure the scanner functions from the machine.
NOTE: Refer to each scanner function operation procedure as explained in Operation Guide for
information how to display the scanner function settings screen.
The available settings may vary depending on the sending method.
The following settings are available from the scanner function screen's [Basic] tab.
• Selecting Original Size...4-3
• Select Sending Size...4-3
• Selecting Original Orientation...4-4
• Scan Resolution...4-4
• File Name Input...4-5
• File Type...4-5
4-2
Ready to scan. (
Place the original and select destination.
Scan to PC-Sending
Destination
Delete
Save at Address
User PC Book
Full-Color ) Original Send
11×8½" 8½×11"
08/08/'05 14:00
Register Prgrm Cont. TX to
Auto Top Edge Auto
Select Orig. Set File Name
Orig.Size Direction Input
Auto size 200dpi JPEG
Select Scanning
File Type
Send Size Resolution
Basic
Quality Edit
Cancel