Paper; Basic Paper Specifications - Kyocera KM-2540 Advanced Operation Manual

6-2

Paper

Basic Paper Specifications

This machine is designed to print on standard copy paper as used in
regular ('dry') copiers and page printers such as laser printers. It also
supports a variety of other types of paper that conform to the
specifications given in this appendix.
Be careful when choosing paper. Paper unsuitable for the machine may
cause jams or may be wrinkled.
For transparencies, labels, envelopes, and similar types of paper, use
the MP tray.
Note Some recycled paper does not meet requirements for use
with this machine as listed in the Basic Paper Specifications shown
below, such as moisture or pulp content. For this reason, we
recommend purchasing a small amount of recycled paper as a
sample for testing prior to use. Choose recycled paper that gives
the best copying results and contains low levels of paper dust.
We are not responsible for problems that occur from the use of
paper that does not conform to our specifications.
Supported Paper
Use standard copy paper for regular copiers or laser printers. The copy
quality will be affected by the quality of paper. Poor quality paper may
result in unsatisfactory output.
Basic Paper Specifications
The following table lists the specifications of paper that is supported with
this machine. Refer to the subsequent sections for further details.
Criteria
Weight
Thickness
Dimensional accuracy
Squareness of corners
Moisture content
Grain direction
Pulp content
Specifications
Cassettes: 60 to 120 g/m²
MP tray: 45 to 200 g/m²
0.086 to 0.110 mm
±0.7 mm
90° ±0.2°
4 to 6 %
Long grain (paper supply direction)
80 % or more
Appendix