Setting Sleep Timer Timeout; Setting Low-Power Timer Timeout; Setting Auto Clear Timeout Time; Selecting Output Destination - Kyocera KM-2540 Advanced Operation Manual

3-18

Setting Sleep Timer Timeout

Set the time until Auto Sleep mode is activated when [On] is selected in
Activating Auto Sleep on page 3-21. Specify a value from 1 - 240
minutes (1 minute increments). For further details on Auto Sleep mode,
refer to Sleep Mode in Chapter 3 of Operation Guide.
Note If the device is used frequently, it is recommended to set
Auto Sleep mode to a larger time delay, and to a shorter time delay
if the periods of non-use are longer.
1
Referring to Accessing the Machine Default Screen on page 3-11,
access the Machine Default screen.
2
Press [ ] or [ ] to select Sleep mode changing time and press
[Change #].
3
Press [+] or [–] to set the time until Auto Sleep mode is activated.
4
Press [Close] to save settings or [Back] to cancel settings. The
display returns to the Machine Default screen.

Setting Low-Power Timer Timeout

Set the time until Auto Low-Power mode is activated. Specify a value
from 1 - 240 minutes (1 minute increments). For further details on Auto
Low-Power mode, refer to Low-Power Mode in Chapter 3 of Operation
Guide.
1
Referring to Accessing the Machine Default Screen on page 3-11,
access the Machine Default screen.
2
Press [ ] or [ ] to select Low power mode chng. time and press
[Change #].
3
Press [+] or [–] to set the time until Auto Low-Power mode is
activated.
4
Press [Close] to save settings or [Back] to cancel settings. The
display returns to the Machine Default screen.

Setting Auto Clear Timeout Time

Set the time until Auto Clear is activated after the last operation when
[On] is selected in Activating Auto Clear on page 3-21. Specify a value
from 10 - 270 minutes (10 minute increments).
1
Referring to Accessing the Machine Default Screen on page 3-11,
access the Machine Default screen.
2
Press [ ] or [ ] to select Auto Clear Time Setting and press
[Change #].
3
Press [+] or [–] to set the time until Auto Clear is activated.
4
Press [Close] to save settings or [Back] to cancel settings. The
display returns to the Machine Default screen.

Selecting Output Destination

Set the default copy output destination.
Paper Output Description
Top tray Outputs to the top tray of the machine.
Job Sep. Tray Outputs to the optional job separator.
Finisher tray Outputs to the optional document finisher tray or
built-in finisher tray.
System Menu