Choosing The Appropriate Paper - Kyocera KM-2540 Advanced Operation Manual

Appendix

Choosing the Appropriate Paper

This section describes guidelines for choosing paper.
Condition
Avoid using paper with bent corners or that is curled, dirty, or torn. Do
not use paper that has a rough surface or paper fiber lint, or that is
especially delicate. Use of paper in any of these conditions will not only
deliver poor copies but may also cause jams and shorten the useful life
of the machine. Choose paper with a smooth and even surface;
however, avoid coated paper or paper with a treated surface as it may
damage the drum or fusing unit.
Ingredient
Do not use paper such as paper that has been coated or surface-treated
or paper that contains plastic or carbon. These types of paper may
produce harmful fumes from the heat of copying and may damage the
drum.
Be sure to use plain paper that contains at least 80 % pulp, i.e., not more
than 20 % of the total paper content consists of cotton or other fibers.
Supported Paper Sizes
Paper of the following sizes is supported by the cassettes and MP tray.
Measurements in the table take into account a ±0.7-mm dimensional
accuracy for length and width. Corner angles must be 90° ±0.2°.
MP Tray
B6R (128 × 182 mm)
Postcard (100 × 148 mm)
Return postcard (148 × 200 mm)
Executive (7 1/4 × 10 1/2")
Envelope DL (110 × 220 mm)
Envelope C5 (162 × 229 mm)
Envelope C4 (229 × 324 mm)
ISO B5 (176 × 250 mm)
Comm. #10 (4 1/8 × 9 1/2")
Comm. #9 (3 7/8 × 8 7/8")
Comm. #6-3/4 (3 5/8 × 6 1/2")
Monarch (3 7/8 × 7 1/2")
YOUKEI 2 (114 × 162 mm)
YOUKEI 4 (105 × 235 mm)
Input size
(3 7/8 × 5 7/8" to 11 5/8 × 17")
(98 × 148 to 297 × 432 mm)
Cassette or MP Tray
A3 (297 × 420 mm)
B4 (257 × 364 mm)
A4 (297 × 210 mm)
A4R (210 × 297 mm)
B5 (257 × 182 mm)
B5R (182 × 257 mm)
A5R (148 × 210 mm)
Folio (210 × 330 mm)
11 × 17"
8 1/2 × 14"
11 × 8 1/2"
8 1/2 × 11"
5 1/2 × 8 1/2"
8 1/2 × 13" (Oficio II)
8 1/2 × 13 1/2"
8K (273 × 394 mm)
16K (273 × 197 mm)
(197 × 273 mm)
16KR
6-3