Original Orientation - Kyocera KM-2540 Advanced Operation Manual

Ready to Job build.
Place originals then press Start key.
Job Build - Step
Density 4 Text
Original
Density EcoPrint
Image
Quality
Basic
Copy Functions
3
4
Zoom
Select the desired magnification.
1
2
3

Original Orientation

Check the orientation of the original.
1
2
3
Density
Set the copy density. The setting items are as follows.
Item
Auto
Manual
1
2
Off
3
1 sided copy-Left
Finished page #:
Edit
Original Image Quality
Specify the Image Quality based on the original type.
1
2
3
Check the orientation of the original.
Note Incorrect copying may occur if the original is not placed
correctly.
Press [Close].
Press [Basic]. On the next screen, press [Zoom].
Select the desired magnification.
For instructions on reducing/enlarging, refer to Zoom in Chapter 3 of
Operation Guide.
Press [Close].
Press [Basic]. On the next screen, press [Original Orient.].
Select [Top Edge Top] or [Top Edge Left].
Note Incorrect copying may occur if the original is not placed
correctly.
Press [Close].
Description
Automatically adjusts copy contrast.
Manually adjust the copy contrast.
Press [Quality] and on the next screen press [Density].
Select [Auto] or [Manual].
If [Manual] is selected, press [Lighter] or [Darker] to adjust the
contrast.
Press [Close].
Press [Quality] and on the next screen, press [Original Image].
Select the image quality. For further details on image quality, refer to
Selecting Image Quality in Chapter 3 of Operation Guide.
Press [Close].
1-39