Responding To Error Messages - Kyocera KM-2540 Advanced Operation Manual

Display
Close ### cover.
Check the cover.
Close Document Processor.
Close Document processor
cover.
Set cassette #.
(Close paper cassette #.)
Open cassette #, check and
remove paper from inside of the
machine.
(Open cassette #, check and
remove paper from inside of
machine.)
Reset feeding unit for paper
cassette.
Add paper in cassette #.
(Add paper cassette #.)
Add paper in the Multi Purpose
Tray.
## size
(Place paper on the Multi
Purpose Tray.
## size)
Add paper in the Multi Purpose
Tray.
(Add paper on the Multi Purpose
Tray.)
Change the size of MP tray.
Check paper size.
Reposition original.
5-4

Responding to Error Messages

If the touch panel displays any of these messages, follow the
corresponding procedure.
Checkpoints
Is the indicated cover open?
Are any covers open?
Does the message indicate
which cover is open?
Is the optional document
processor open while loading
the original?
Is the optional document
processor top cover open?
Is the indicated cassette not
fully closed?
—
Is the paper feed unit securely
pushed into the machine?
Is the indicated cassette out of
paper?
Is paper of the specified size
loaded in the MP tray?
Has all the paper on the MP tray
been fed?
Is the specified size paper
loaded in the MP tray?
Is the specified size paper
loaded?
Is the orientation of the specified
paper different from that of the
original?
Corrective Actions
Close all covers securely.
Close all covers securely.
Close the document processor.
Close the document processor
top cover.
Pull out the cassette and push in
securely.
Completely pull out the
indicated cassette and remove
any paper inside.
Pull out the paper feed unit and
securely push it all the way into
the machine.
Load paper. If the same type of
paper is loaded in another
cassette in the same orientation,
you can press either one of
paper selection keys on the left
of the touch panel to switch to
that cassette for copying.
Load paper of the size indicated
in the MP tray.
Load paper in the MP tray.
Reconfigure the size of the MP
tray.
Load paper of a size that can be
used.
Change the orientation of the
original. If you press the Start
key without doing so, the
original will be copied at the
current size.
Reference Page
—
—
—
Refer to Operation
Guide, Chapter 2
—
—
Refer to Operation
Guide, Chapter 6
—
Refer to Operation
Guide, Chapter 2
Refer to Operation
Guide, Chapter 2
Refer to Operation
Guide, Chapter 2
—
—
Troubleshooting