Setting Notification Sounds; Silent Mode; Changing Management Code - Kyocera KM-2540 Advanced Operation Manual

3-20
4
Press [Close] to save settings or [Back] to cancel settings. The
display returns to the Machine Default screen.

Setting Notification Sounds

Set the notification sounds made by the machine during operation. The
setting items are as follows.
Item
Touch tone notification
Finish notification
Ready notification
Attention notification
Set each item to [On] to enable sound notification. Set each item to [Off]
to disable sound notification.
1
Referring to Accessing the Machine Default Screen on page 3-11,
access the Machine Default screen.
2
Press [ ] or [ ] to select Notify (Touch tone), Notify (Finish), Notify
(Ready) or Notify (Attention) and press [Change #].
3
Select [Off] or [On].
4
Press [Close] to save settings or [Back] to cancel settings. The
display returns to the Machine Default screen.

Silent Mode

Configures the machine to operate more quietly. To decrease the
operating noise level, set Silent Mode to [On]. The setting items are as
follows.
Item Description
Off Do not enable Silent Mode.
On Enable Silent Mode and reduce the operating
noise level.
1
Referring to Accessing the Machine Default Screen on page 3-11,
access the Machine Default screen.
2
Press [ ] or [ ] to select Silent Mode and press [Change #].
3
Select [Off] or [On].
4
Press [Close] to save settings or [Back] to cancel settings. The
display returns to the Machine Default screen.

Changing Management Code

Change the machine's management code.
IMPORTANT Be sure to record the management code when
changing it. If forgotten, contact your Service Representative.
Description
The beep sound made when a key on the
operation panel or touch panel is pressed.
The sound made when a copy or print
operation finishes without error.
The sound made when warm-up is
complete.
The sound made when an error has
occurred.
System Menu