Setting General Functions; Setting The Auto Clear Mode - Kyocera TASKalfa 650c Management Manual

Setting General Functions

Setting the auto clear mode

This function sets how long the machine waits before clearing the previous functions set on the control panel.
Press [GENERAL] in the USER menu.
1
The GENERAL menu is displayed.
To display the USER menu, see the following page:
P.8 "Entering User Menu"
Press [AUTO CLEAR].
2
The AUTO CLEAR screen is displayed.
Press the button that indicates the desired time in seconds.
3
The auto clear mode has been set to the selected time.
If you want to disable the auto clear mode, press [NO LIMIT].
Even if [NO LIMIT] is selected, the screen will be cleared after 45 seconds when users are operating in the
USER FUNCTION, JOB STATUS, or TEMPLATE screen.
1 SETTING ITEMS (USER)

Setting General Functions

9