Table of Contents
Advertisement
Mounting bracket kit
Figure 5 Mounting bracket kit
Attaching the mounting brackets to the chassis
The 3100-48 v2 switch provides one front mounting position and one rear mounting position. You can
install the mounting brackets as needed.
1.
Wear an ESD-preventive wrist strap, and make sure that the wrist strap makes good skin contact
and is well grounded.
2.
Align one mounting bracket with the screw holes in the front-mounting position
rear-mounting position
3.
Use M4 screws (supplied with the switch) to fix the mounting bracket to the switch chassis.
4.
Repeat the proceeding steps to attach the other mounting bracket to the chassis.
Figure 6 1U mounting bracket front mounting position
Figure 7 1U mounting bracket rear mounting position
Rack-mounting a 3100-48 v2 switch
This installation task requires two persons. To mount the switch in a rack:
(Figure
7)..
7
(Figure
6) or the
Advertisement
Table of Contents
