Series Rack; Angle Brackets Mounted On Cabinet Rails In Hp 9000, Hp 10000, And Hp - HP StorageWorks Director 2/140 Installation Manual

4. Position a small angle bracket along the interior vertical rail as shown in
5. Secure the angle bracket to the rail using two self-tapping sheet metal screws.
6. Repeat
Figure 10: Angle brackets mounted on cabinet rails in HP 9000, HP 10000, and
HP 11000 series rack
7. Attach two shelf brackets to the angle brackets on each side of the cabinet
Note:
Director 2/140 Installation Guide
Figure 10. Align the angle bracket so that the two threaded holes on the small
tab align with the 1U location marked in
step 2 through
vertical rail of the cabinet.
using eight (8) pan head screws and a #2 Phillips head screwdriver as shown
in Figure 11.
Center each shelf bracket between the interior vertical rails of the rack cabinet.
step
step 5 to mount a small angle bracket on each interior
Installing and Configuring the Director
3.
45