Installing The Outer Rails (Hp 10000 Series Or Comparable Eia Cabinet) - HP StorageWorks 2/16 - SAN Switch Installation Manual

Installing the SAN Switch 2/16
Figure 6: Installing the outer rails (HP 10000 series or comparable EIA cabinet)
30
a. Attach the left outer rail and the right outer rails to the rear mounting
brackets using two 1/4-20 hex nuts with captive star lock washers
attached loosely as shown in
will be tightened later in
Figure 6. Do not tighten the hex nuts; they
step 8 on page 36.
SAN Switch 2/16 Version 3.1.2 Installation Guide