Outputting System Information To A Log Host - HP A3100-8 v2 EI Configuration Manual

To do...
Name the channel with a specified
channel number
Configure the channel through
which system information can be
output to a monitor terminal
Configure the output rules of the
system information
Configure the format of the time
stamp
Enabling the display of system information on a monitor terminal
After setting to output system information to a monitor terminal, you need to enable the associated
display function in order to display the output information on the monitor terminal.
Follow these steps to enable the display of system information on a monitor terminal:
To do...
Enable the monitoring of system
information on a monitor terminal
Enable the display of debugging
information on a monitor terminal
Enable the display of log
information on a monitor terminal
Enable the display of trap
information on a monitor terminal

Outputting system information to a log host

To do...
Enter system view
Enable information center
Use the command...
info-center channel
channel-number name
channel-name
info-center monitor channel
{ channel-number |
channel-name }
info-center source { module-name |
default } channel { channel-number
| channel-name } [ debug { level
severity | state state } * | log { level
severity | state state } * | trap
{ level severity | state state } * ] *
info-center timestamp { debugging
| log | trap } { boot | date | none }
Use the command...
terminal monitor
terminal debugging
terminal logging
terminal trapping
Use the command...
system-view
info-center enable
161
Remarks
Optional
See Table 5 for default channel
names.
Optional
By default, system information is
output to the monitor terminal
through channel 1 (monitor).
Optional
See "Default output rules of system
information."
Optional
By default, the time stamp format
for log, trap and debugging
information is date.
Remarks
Required
Enabled on the console and
disabled on the monitor terminal
by default.
Required
Disabled by default
Optional
Enabled by default
Optional
Enabled by default
Remarks
—
Optional
Enabled by default