Prerequisites; Supported Features - Cisco WS C4224V 8FXS - 200Mbps Ethernet Switch Software Configuration Manual

Chapter 8 Configuring Survivable Remote Site Telephony

Prerequisites

Supported Features

OL-2031-02
Prerequisites for employing the SRST feature on the Catalyst 4224 are as follows:
IP routing must be enabled.
•
The SRST Catalyst 4224 must be configured as the default for the
•
Cisco IP Phones.
Cisco IOS Release 12.1(5)YD or higher is required.
•
Cisco CallManager Release 3.0.5 or higher is required.
•
You must use the appropriate Cisco IP Phone load versions that support the
•
SRST feature for the Cisco IP Phone 7960, Cisco IP Phone 7940, and
Cisco IP Phone 7910 models.
For further details, refer to your Cisco CallManager documentation.
The following features are supported on the Cisco IP Phones:
Re-homing of Cisco IP Phones to use call processing on the local
•
Catalyst 4224
Cisco IP Phone and plain old telephone service (POTS) telephones on the
•
Catalyst 4224
Graying out of all Cisco IP Phone function keys that are not supported during
•
SRST mode:
CFwdAll (call forward all)
–
MeetMe
–
PickUp
–
GPickUp (group pickup)
–
Park
–
Confrn (conference)
–
Extension-to-extension dialing
•
Direct inward dialing (DID)
•
Direct outward dialing (DOD)
•
Catalyst 4224 Access Gateway Switch Software Configuration Guide
Overview of Survivable Remote Site Telephony
8-3